Ascendo The 6 Passive Narrow
Ascendo · Speaker · Narrow · 2021
- L3 · Verified
- Measured directivity
Open in the designer Add to compare Opens the designer's starter room with the Ascendo The 6 Passive Narrow on the left, centre and right channels. It replaces the design open in this browser once you edit it, as a shared link does.
Specifications
| Property | Value | Source |
|---|---|---|
| Sensitivity | 93 dB/2.83V/m voltage: 2.83V · distance: 1m · loading: unstated · unit: dB/2.83V/m | Sensitivity: Independent measurement, Klippel NFS Independent measurement, Klippel NFS, Document ↗ |
| Impedance, nominal | 8 Ω | Impedance, nominal: Not stated in the record Not stated in the record |
| Impedance, minimum | Not stated The record carries no minimum impedance. | — |
| Maximum SPL | 111 dB (continuous) loading: half_space · basis: continuous | Maximum SPL: Manufacturer, Ascendo THE6 P NA technical data (March 2026) Manufacturer, Ascendo THE6 P NA technical data (March 2026), Document ↗ |
| LF extension | 110 Hz (-3dB) tolerance: -3dB | LF extension: Manufacturer, Ascendo THE6 P NA technical data (March 2026) Manufacturer, Ascendo THE6 P NA technical data (March 2026), Document ↗ |
| Coverage, H × V | 85° × 85° tolerance: unstated · frequency: unstated | Coverage, H × V: Manufacturer, Ascendo product page Manufacturer, Ascendo product page Document ↗ |
Measured directivity
Measured horizontal and vertical directivity is on file for this model. The Cinema Designer's reflections engine uses it in place of the coverage-angle model.
- Source type
- Independent measurementDirectivity: Independent measurement, Klippel NFS measurement report
- Source
- Klippel NFS measurement report, Contralto Audio
- Confidence
- high
- Note
- Read 2026-09-26 from the vector paths of the SPL Horizontal / SPL Vertical pages (openavdb extraction script). Per-plane distance, smoothing and reference voltage are in the data file.
Horizontal off-axis response
- Extracted from a published plot
- 0°
- 20°
- 40°
- 60°
- 90°
Plotted values
| Hz | 0° | 20° | 40° | 60° | 90° |
|---|---|---|---|---|---|
| 20 | — | — | — | — | — |
| 25 | 0 | -0.15 | -0.26 | -0.36 | -0.7 |
| 31.5 | 0 | 0.03 | 0.08 | 0.14 | 0.17 |
| 40 | 0 | 0.07 | 0.14 | 0.19 | 0.23 |
| 50 | 0 | 0.03 | 0.05 | 0.09 | 0.1 |
| 63 | 0 | 0.01 | 0.01 | 0.01 | 0.02 |
| 80 | 0 | -0.01 | -0.02 | -0.02 | -0.03 |
| 100 | 0 | 0.01 | 0.03 | 0.04 | 0.05 |
| 125 | 0 | 0.07 | 0.14 | 0.19 | 0.22 |
| 160 | 0 | -0.04 | -0.06 | -0.06 | -0.04 |
| 200 | 0 | -0.09 | -0.16 | -0.2 | -0.22 |
| 250 | 0 | -0.02 | -0.03 | -0.02 | -0.02 |
| 315 | 0 | 0 | 0 | 0.01 | 0.02 |
| 400 | 0 | -0.08 | -0.15 | -0.2 | -0.23 |
| 500 | 0 | -0.1 | -0.28 | -0.45 | -0.56 |
| 630 | 0 | -0.14 | -0.39 | -0.64 | -0.82 |
| 800 | 0 | -0.44 | -1.23 | -1.91 | -2.26 |
| 1000 | 0 | -0.53 | -1.52 | -2.36 | -2.87 |
| 1250 | 0 | -0.47 | -1.59 | -2.56 | -3.04 |
| 1600 | 0 | -0.55 | -2 | -3.47 | -4.26 |
| 2000 | 0 | -1.01 | -3.33 | -6.06 | -7.47 |
| 2500 | 0 | -0.95 | -4.33 | -7.97 | -9.44 |
| 3150 | 0 | -2.1 | -4.97 | -8.19 | -9.45 |
| 4000 | 0 | -2.1 | -6 | -10.21 | -11.7 |
| 5000 | 0 | -2.22 | -6.42 | -9.49 | -11.29 |
| 6300 | 0 | -1.49 | -3.93 | -7.22 | -10.23 |
| 8000 | 0 | 0.4 | -0.77 | -3.31 | -7.34 |
| 10000 | 0 | 1.89 | 1.09 | -4.91 | -10.97 |
| 12500 | 0 | -0.6 | -6.33 | -19.58 | -25.22 |
| 16000 | 0 | 0.09 | -9.37 | -12.05 | -15.46 |
| 20000 | 0 | -7.57 | -13.9 | -15.94 | -22.32 |
Vertical off-axis response
- Extracted from a published plot
- 0°
- 20°
- 40°
- 60°
- 90°
Plotted values
| Hz | 0° | 20° | 40° | 60° | 90° |
|---|---|---|---|---|---|
| 20 | — | — | — | — | — |
| 25 | 0 | -0.61 | -1.09 | -1.43 | -1.56 |
| 31.5 | 0 | -0.25 | -0.19 | 0 | 0.16 |
| 40 | 0 | -0.48 | -0.67 | -0.68 | -0.62 |
| 50 | 0 | -0.26 | -0.33 | -0.29 | -0.23 |
| 63 | 0 | -0.18 | -0.27 | -0.29 | -0.27 |
| 80 | 0 | -0.1 | -0.16 | -0.18 | -0.2 |
| 100 | 0 | -0.07 | -0.12 | -0.15 | -0.15 |
| 125 | 0 | -0.05 | -0.11 | -0.15 | -0.17 |
| 160 | 0 | -0.04 | -0.06 | -0.07 | -0.07 |
| 200 | 0 | -0.05 | -0.1 | -0.14 | -0.15 |
| 250 | 0 | 0.1 | 0.14 | 0.15 | 0.16 |
| 315 | 0 | 0.18 | 0.25 | 0.31 | 0.36 |
| 400 | 0 | -0.16 | -0.45 | -0.69 | -0.83 |
| 500 | 0 | -0.53 | -1.3 | -1.96 | -2.36 |
| 630 | 0 | -3.09 | -5.45 | -5.87 | -6.03 |
| 800 | 0 | 0.65 | 2.12 | 2.92 | 3.31 |
| 1000 | 0 | 1.15 | 0.88 | 0.06 | -0.6 |
| 1250 | 0 | 0.01 | -3.05 | -6.12 | -7.57 |
| 1600 | 0 | -0.5 | -0.47 | -1.58 | -2.29 |
| 2000 | 0 | -1.08 | -2.74 | -5.88 | -7.11 |
| 2500 | 0 | -1.53 | -3.27 | -7.91 | -10.28 |
| 3150 | 0 | -1.26 | -5.25 | -8.81 | -10.7 |
| 4000 | 0 | -1.69 | -5.08 | -8.78 | -10.96 |
| 5000 | 0 | -2.39 | -6.63 | -8.62 | -10.87 |
| 6300 | 0 | -1.73 | -3.95 | -7.08 | -10.41 |
| 8000 | 0 | 0.38 | -0.13 | -4.09 | -7.94 |
| 10000 | 0 | 2.15 | 1.72 | -4.64 | -9.62 |
| 12500 | 0 | -0.48 | -5.66 | -15.35 | -22.61 |
| 16000 | 0 | 0.86 | -6.23 | -11.61 | -17.8 |
| 20000 | 0 | -6.11 | -14.59 | -17.49 | -29.82 |