OpenHomeAV

All openavdb models

Ascendo The 10 Passive On-Wall

Ascendo · Speaker · On-wall · 2024

Open in the designer Add to compare Opens the designer's starter room with the Ascendo The 10 Passive On-Wall on the left, centre and right channels. It replaces the design open in this browser once you edit it, as a shared link does.

Specifications

Property Value Source
Sensitivity 94.5 dB/2.83V/m voltage: 2.83V · distance: 1m · baffle loading: 2pi (half-space) · unit: dB/2.83V/m Sensitivity: Independent measurement, Klippel NFS Independent measurement, Klippel NFS, Document ↗
Impedance, nominal Not stated The record carries no nominal impedance. —
Impedance, minimum Not stated The record carries no minimum impedance. —
Maximum SPL Not stated Klippel report on file; the value is a plot image and needs the vision extraction pass —
LF extension Not stated Klippel report on file; the value is a plot image and needs the vision extraction pass —
Coverage, H × V 80° × 80° tolerance: unstated · frequency: unstated Coverage, H × V: Manufacturer, Ascendo product page Manufacturer, Ascendo product page Document ↗

Measured directivity

Measured horizontal and vertical directivity is on file for this model. The Cinema Designer's reflections engine uses it in place of the coverage-angle model.

Source type
Independent measurementDirectivity: Independent measurement, Klippel NFS measurement report
Source
Klippel NFS measurement report, Contralto Audio
Confidence
high
Note
Read 2026-09-26 from the vector paths of the SPL Horizontal / SPL Vertical pages (openavdb extraction script). Per-plane distance, smoothing and reference voltage are in the data file.

Open the source document

Horizontal off-axis response

  • Extracted from a published plot
Horizontal off-axis response, Ascendo The 10 Passive On-Wall: extracted from a published plot. Relative to on-axis (dB) against frequency (hz), 20 to 20000 Hz. -40 -30 -20 -10 0 10 20 50 100 200 500 1k 2k 5k 10k 20k Frequency (Hz) 0° 20° 40° 60° 90° 0°20°40°60°90° Relative to on-axis (dB) Horizontal off-axis response, Ascendo The 10 Passive On-Wall: extracted from a published plot. Relative to on-axis (dB) against frequency (hz), 20 to 20000 Hz. -40 -30 -20 -10 0 10 20 100 1k 10k Frequency (Hz) 0° 20° 40° 60° 90° 0°20°40°60°90° Relative to on-axis (dB)
  • 0°
  • 20°
  • 40°
  • 60°
  • 90°
Plotted values
Hz0°20°40°60°90°
20—————
250-0.140.030.130.23
31.50-0.25-0.24-0.21-0.2
400-0.28-0.3-0.32-0.33
500-0.22-0.24-0.26-0.26
630-0.14-0.14-0.16-0.16
800-0.14-0.15-0.17-0.17
1000-0.13-0.14-0.17-0.18
1250-0.13-0.18-0.18-0.22
1600-0.08-0.13-0.16-0.19
2000-0.12-0.17-0.23-0.27
2500-0.11-0.19-0.29-0.36
3150-0.16-0.34-0.5-0.63
4000-0.13-0.34-0.56-0.72
5000-0.3-0.82-1.32-1.67
6300-0.41-1.1-1.88-2.44
8000-0.8-2.17-3.57-4.55
10000-0.61-1.82-3.06-3.9
12500-0.71-2.57-4.92-6.91
16000-0.98-4.04-7.86-10.46
20000-1.95-5.7-9.2-11.11
25000-1.9-5.15-8.97-11.39
31500-1.21-5.99-9.53-11.61
40000-1.02-4.41-8.73-11.07
50000-0.52-2.19-7.29-10.56
630002.450.87-5.64-10.11
80000-0.09-5.35-16.15-20.84
100000-1.88-9.34-15.85-20.22
125000-5.62-12.9-18.43-27.68
160000-10.06-14.17-25.88-26.03
200000-11.27-19.78-25.73-27.56
Relative to on-axis at each third-octave band; published 0 to 90° (symmetric). Gaps: No value below 25.2 Hz: the curves fall under the plot's 55 dB floor on report page 14, so the page does not show them. Source conditions: vector paths read from the SPL Horizontal / SPL Vertical pages (openavdb extraction script). Source: Klippel NFS measurement report, Contralto Audio MEAS

Vertical off-axis response

  • Extracted from a published plot
Vertical off-axis response, Ascendo The 10 Passive On-Wall: extracted from a published plot. Relative to on-axis (dB) against frequency (hz), 20 to 20000 Hz. -40 -30 -20 -10 0 10 20 50 100 200 500 1k 2k 5k 10k 20k Frequency (Hz) 0° 20° 40° 60° 90° 0°20°40°60°90° Relative to on-axis (dB) Vertical off-axis response, Ascendo The 10 Passive On-Wall: extracted from a published plot. Relative to on-axis (dB) against frequency (hz), 20 to 20000 Hz. -40 -30 -20 -10 0 10 20 100 1k 10k Frequency (Hz) 0° 20° 40° 60° 90° 0°20°40°60°90° Relative to on-axis (dB)
  • 0°
  • 20°
  • 40°
  • 60°
  • 90°
Plotted values
Hz0°20°40°60°90°
20—————
2501.713.75.146.01
31.500.952.383.534.23
4000.51.392.122.61
5000.270.821.31.61
6300.120.450.720.91
800-0.030.10.190.26
1000-0.08-0.04-0.010
1250-0.13-0.14-0.2-0.26
1600-0.12-0.23-0.36-0.47
2000-0.16-0.32-0.49-0.62
2500-0.16-0.36-0.58-0.72
3150-0.42-0.91-1.34-1.63
4000-0.52-1.25-1.99-2.49
5000-0.51-1.41-2.36-3.03
6300-0.28-1.45-3.04-4.36
80000.32-0.2-1.32-2.4
10000-0.2-0.95-2.06-3.17
12500-0.64-1.64-3.3-5.19
16000-2.09-6.19-9.14-10.26
20000-0.62-4.23-9.3-11.56
25000-1.2-4.51-10.06-12.48
31500-1.8-4.44-10.06-12.7
40000-1.79-4.47-8.2-12.09
50000-0.36-2.32-7.81-12.51
630002.370.37-4.83-11.67
80000-0.33-5.81-13.26-21.19
100000-1.66-9.65-15.17-22.19
125000-3.56-12.71-18.17-26.52
160000-7.11-12.2-26.18-30.48
200000-11.53-22.2-25.3-36.16
Relative to on-axis at each third-octave band; published 0 to 90° (symmetric). Gaps: No value below 25.2 Hz: the curves fall under the plot's 55 dB floor on report page 15, so the page does not show them. Source conditions: vector paths read from the SPL Horizontal / SPL Vertical pages (openavdb extraction script). Source: Klippel NFS measurement report, Contralto Audio MEAS